Complaint / Review
USBID-modeswitch ZTE
ZTE ZTE631 Modem, ZTE WCDA Technologies USBID code USBID modeswitch ZTE ZTE631 Modem, ZTE WCDMA Technologies Unable to run the usbid modeswitch on this ARM based embedded device

Problem in switching the ID for the USB port using the ZTE631. I need to run usbid modeswitch on an ARM based embedded device.
Where I installed usbid modeswitch-1.1.9-jimsh. Tar. Bz2 along with the usbid modeswitch-data package.

Now when, I put my dongle (ZTE631 Modem), it fails to switch. I can't get help from phone in customer support so I'm posting this online for help. Changing the ID on my USB port is not working.

I have enabled log, which looks like:
Code:
USBID ModeSwitch log from Thu Aug 18 12:26: 18 UTC 2011

Raw args from udev: 1-1:1.0/1-1:1.0 {}

Using global config file: / etc/usbid_modeswitch. Conf

USBID values from sysfs:
manufacturer ZTE, Incorporated
product ZTE WCDMA Technologies MSM
serial MF6310ZTED010000

BNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: / usr/share/usbid_modeswitch/19d2:2000
! Matched, now switching
(running command: / usr/sbin/usbid_modeswitch -I -W -c / usr/share/usbid_modeswitch/19d2:2000)

Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are expected in the process)

Reading config file: / usr/share/usbid_modeswitch/19d2:2000

* usbid modeswitch: handle USBID devices with multiple modes
* Version 1.