Hi folks.
Am in the process of changing from a Sky contract to a freesat set up. Just reveived a Humax HDR and am just wondering how I should connect everything. (beginner alert)
Below is a picture of how things are currently:
The Sky receiver will be changed to the Humax receiver, which has no RF outs. I have purchased a Deram Boxwhich has one RF out.
Do I simply need one of AZBOX to feed the analogue to both the main tv and send a signal to feed the other tvs?
So should my new set up look like this? Dreambox DM800 HD PVR
Well before we get into the distribution side of things, your diagram shows only a single feed from the dish to the Foxsat HDR.
DreamBox dm600S PVR
DreamBox 500
DreamBox DM500C
Dreambox 500si
DreamBox DM500s
Dreambox DM500C
Dreambox DM518s
Dreambox DM7020Si
DreamBox 7020S
DreamBox 500S-OEM
DreamBox DM500T
DreamBox 500C-OEM
DreamBox DM5620
DreamBox DM7000
DreamBox 7020
Dreambox DM800 HD PVR
AzBox HD Elite
AzBox HD Premiumou require two feeds (not via a splitter, either) for full HDR functionality.
Please confirm how many feeds you actually do have available?
If only only have a single output LNB, then you will need to fit a quad (Twins are no longer available for Sky dishes). Thanks Tivù.
I should have mentioned that. For the moment there is a single LNB on the dish so I will be using a loop through for the time being.
Eventually there will be a quad LNB and each tv will have a receiver. But the above has to get me by for a couple of weeks.
0 comments