Usacomplaints.com » TV & Radio » Complaint / Review: Magnavox 50 Plasma TV - No video or audio on Plasma HDTV. #398015

Complaint / Review
Magnavox 50" Plasma TV
No video or audio on Plasma HDTV

I purchased my Magnavox 50" lcd in December.in November I observed progressively longer delays within the movie arriving on after switching on the ability after which the sound started to wait arriving on. Following a couple weeks of the issue the sound and movie subsequently ceased arriving on whatsoever. Nevertheless, there is energy likely to the system since the natural energy lighting was functioning. I observed more than 50 additional customers with this site had exactly the same issue. Using the help of others on this site, i've set the issue for $4.24. Yes, for under $5.00 i've a functional hdtv again, but without any because of philips - magnavox. THEY CERTAINLY WERE INEFFECTIVE.

This is actually the fix:

1. Disconnect your power wire.

2. Eliminate back-panel in your HD.

3. Search for capacitors which have a bubbled or somewhat elevated and curved top. This suggests the capacitors have overheated or lost and require changed. The standard search is just a smooth area without any elevated function whatsoever. (I'd two poor capacitors which were part-by-side and similar: 3300uf 10v. Additionally, they must be on the power panel. Our power board was in the centre of my 50" plasma.)

4. Visit an electronics-store or Radio Shack and find out when they bring your capacitor kind and dimension and substitute them yourself if you should be confident with eliminating the capacitors and soldering fresh types towards the power panel. The capacitors can cost you $2.00 each or less.

5. I had been uncomfortable changing the capacitors myself and so I eliminated the ability source panel by eliminating the screws and unplugging many cable contacts. It was simple enough whatsoever. I subsequently introduced the energy source board to some nearby technology store that did repairs on HDTVs and just requested them to solder both new capacitors onto the ability supply panel. They made it happen FREE OF CHARGE while I waited also it just required about 10 minutes.

6. I changed the energy source panel and back-panel of Television also it worked!

Many people with this view recommended changing the capacitors with a few which have higher-temperature rankings. Centered on that guidance, I needed to displace my two which were poor (3300uf 10v) with two ranked at 4700uf 35v, but my technology man recommended against it. Alternatively, I changed mine with 3300uf 16v, using the only distinction in the unique components being the larger voltage (16v instead of 10v). I determine when the issue happens again, I currently understand I will have it mounted for under $5.00. Philips - Magnavox ought to be embarrassed for such bad customer support and never informing people about that easy repair. After I named their customer support assistance amount I had been merely aimed to some fix location — two hours apart!

Feel free to email me for almost any concerns or follow up with this simple repair for the costly investment. Do not get rid of your tvs or purchase a costly fix when you have had this same issue i've described here and thus many others have explained.

best of luck!


Offender: Magnavox 50" Plasma TV

Country: USA   State: West Virginia

Category: TV & Radio

0 comments

Information
Only registered users can leave comments.
Please Register on our website, it will take a few seconds.




Quick Registration via social networks:
Login with FacebookLogin with Google